home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Workbench Add-On
/
Workbench Add-On - Volume 1.iso
/
Gfx
/
Edit
/
TSMorph
/
src
/
jpeg_ls
/
jrdjfif.c
< prev
next >
Wrap
C/C++ Source or Header
|
1994-10-30
|
23KB
|
843 lines
/*
* jrdjfif.c
*
* Copyright (C) 1991, 1992, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
* This file contains routines to decode standard JPEG file headers/markers.
* This code will handle "raw JPEG" and JFIF-convention JPEG files.
*
* You can also use this module to decode a raw-JPEG or JFIF-standard data
* stream that is embedded within a larger file. To do that, you must
* position the file to the JPEG SOI marker (0xFF/0xD8) that begins the
* data sequence to be decoded. If nothing better is possible, you can scan
* the file until you see the SOI marker, then use JUNGETC to push it back.
*
* This module relies on the JGETC macro and the read_jpeg_data method (which
* is provided by the user interface) to read from the JPEG data stream.
* Therefore, this module is not dependent on any particular assumption about
* the data source; it need not be a stdio stream at all. (This fact does
* NOT carry over to more complex JPEG file formats such as JPEG-in-TIFF;
* those format control modules may well need to assume stdio input.)
*
* These routines are invoked via the methods read_file_header,
* read_scan_header, read_jpeg_data, read_scan_trailer, and read_file_trailer.
*/
#include "jinclude.h"
#ifdef JFIF_SUPPORTED
typedef enum { /* JPEG marker codes */
M_SOF0 = 0xc0,
M_SOF1 = 0xc1,
M_SOF2 = 0xc2,
M_SOF3 = 0xc3,
M_SOF5 = 0xc5,
M_SOF6 = 0xc6,
M_SOF7 = 0xc7,
M_JPG = 0xc8,
M_SOF9 = 0xc9,
M_SOF10 = 0xca,
M_SOF11 = 0xcb,
M_SOF13 = 0xcd,
M_SOF14 = 0xce,
M_SOF15 = 0xcf,
M_DHT = 0xc4,
M_DAC = 0xcc,
M_RST0 = 0xd0,
M_RST1 = 0xd1,
M_RST2 = 0xd2,
M_RST3 = 0xd3,
M_RST4 = 0xd4,
M_RST5 = 0xd5,
M_RST6 = 0xd6,
M_RST7 = 0xd7,
M_SOI = 0xd8,
M_EOI = 0xd9,
M_SOS = 0xda,
M_DQT = 0xdb,
M_DNL = 0xdc,
M_DRI = 0xdd,
M_DHP = 0xde,
M_EXP = 0xdf,
M_APP0 = 0xe0,
M_APP15 = 0xef,
M_JPG0 = 0xf0,
M_JPG13 = 0xfd,
M_COM = 0xfe,
M_TEM = 0x01,
M_ERROR = 0x100
} JPEG_MARKER;
/*
* Reload the input buffer after it's been emptied, and return the next byte.
* This is exported for direct use by the entropy decoder.
* See the JGETC macro for calling conditions. Note in particular that
* read_jpeg_data may NOT return EOF. If no more data is available, it must
* exit via ERREXIT, or perhaps synthesize fake data (such as an RST marker).
* For error recovery purposes, synthesizing an EOI marker is probably best.
*
* For this header control module, read_jpeg_data is supplied by the
* user interface. However, header formats that require random access
* to the input file would need to supply their own code. This code is
* left here to indicate what is required.
*/
#if 0 /* not needed in this module */
METHODDEF int
read_jpeg_data (decompress_info_ptr cinfo)
{
cinfo->next_input_byte = cinfo->input_buffer + MIN_UNGET;
cinfo->bytes_in_buffer = (int) JFREAD(cinfo->input_file,
cinfo->next_input_byte,
JPEG_BUF_SIZE);
if (cinfo->bytes_in_buffer <= 0) {
WARNMS(cinfo->emethods, "Premature EOF in JPEG file");
cinfo->next_input_byte[0] = (char) 0xFF;
cinfo->next_input_byte[1] = (char) M_EOI;
cinfo->bytes_in_buffer = 2;
}
return JGETC(cinfo);
}
#endif
/*
* Routines to parse JPEG markers & save away the useful info.
*/
LOCAL INT32
get_2bytes (decompress_info_ptr cinfo)
/* Get a 2-byte unsigned integer (e.g., a marker parameter length field) */
{
INT32 a;
a = JGETC(cinfo);
return (a << 8) + JGETC(cinfo);
}
LOCAL void
skip_variable (decompress_info_ptr cinfo, int code)
/* Skip over an unknown or uninteresting variable-length marker */
{
INT32 length;
length = get_2bytes(cinfo);
TRACEMS2(cinfo->emethods, 1,
"Skipping marker 0x%02x, length %ld", code, (int) length);
for (length -= 2; length > 0; length--)
(void) JGETC(cinfo);
}
LOCAL void
get_dht (decompress_info_ptr cinfo)
/* Process a DHT marker */
{
INT32 length;
UINT8 bits[17];
UINT8 huffval[256];
int i, index, count;
HUFF_TBL **htblptr;
length = get_2bytes(cinfo)-2;
while (length > 0) {
index = JGETC(cinfo);
TRACEMS1(cinfo->emethods, 1, "Define Huffman Table 0x%02x", index);
bits[0] = 0;
count = 0;
for (i = 1; i <= 16; i++) {
bits[i] = (UINT8) JGETC(cinfo);
count += bits[i];
}
TRACEMS8(cinfo->emethods, 2, " %3ld %3ld %3ld %3ld %3ld %3ld %3ld %3ld",
bits[1], bits[2], bits[3], bits[4],
bits[5], bits[6], bits[7], bits[8]);
TRACEMS8(cinfo->emethods, 2, " %3ld %3ld %3ld %3ld %3ld %3ld %3ld %3ld",
bits[9], bits[10], bits[11], bits[12],
bits[13], bits[14], bits[15], bits[16]);
if (count > 256)
ERREXIT(cinfo->emethods, "Bogus DHT counts");
for (i = 0; i < count; i++)
huffval[i] = (UINT8) JGETC(cinfo);
length -= 1 + 16 + count;
if (index & 0x10) { /* AC table definition */
index -= 0x10;
htblptr = &cinfo->ac_huff_tbl_ptrs[index];
} else { /* DC table definition */
htblptr = &cinfo->dc_huff_tbl_ptrs[index];
}
if (index < 0 || index >= NUM_HUFF_TBLS)
ERREXIT1(cinfo->emethods, "Bogus DHT index %ld", index);
if (*htblptr == NULL)
*htblptr = (HUFF_TBL *) (*cinfo->emethods->alloc_small) (SIZEOF(HUFF_TBL));
MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits));
MEMCOPY((*htblptr)->huffval, huffval, SIZEOF((*htblptr)->huffval));
}
}
LOCAL void
get_dac (decompress_info_ptr cinfo)
/* Process a DAC marker */
{
INT32 length;
int index, val;
length = get_2bytes(cinfo)-2;
while (length > 0) {
index = JGETC(cinfo);
val = JGETC(cinfo);
TRACEMS2(cinfo->emethods, 1,
"Define Arithmetic Table 0x%02x: 0x%02x", index, val);
if (index < 0 || index >= (2*NUM_ARITH_TBLS))
ERREXIT1(cinfo->emethods, "Bogus DAC index %ld", index);
if (index >= NUM_ARITH_TBLS) { /* define AC table */
cinfo->arith_ac_K[index-NUM_ARITH_TBLS] = (UINT8) val;
} else { /* define DC table */
cinfo->arith_dc_L[index] = (UINT8) (val & 0x0F);
cinfo->arith_dc_U[index] = (UINT8) (val >> 4);
if (cinfo->arith_dc_L[index] > cinfo->arith_dc_U[index])
ERREXIT1(cinfo->emethods, "Bogus DAC value 0x%x", val);
}
length -= 2;
}
}
LOCAL void
get_dqt (decompress_info_ptr cinfo)
/* Process a DQT marker */
{
INT32 length;
int n, i, prec;
UINT16 tmp;
QUANT_TBL_PTR quant_ptr;
length = get_2bytes(cinfo) - 2;
while (length > 0) {
n = JGETC(cinfo);
prec = n >> 4;
n &= 0x0F;
TRACEMS2(cinfo->emethods, 1,
"Define Quantization Table %ld precision %ld", n, prec);
if (n >= NUM_QUANT_TBLS)
ERREXIT1(cinfo->emethods, "Bogus table number %ld", n);
if (cinfo->quant_tbl_ptrs[n] == NULL)
cinfo->quant_tbl_ptrs[n] = (QUANT_TBL_PTR)
(*cinfo->emethods->alloc_small) (SIZEOF(QUANT_TBL));
quant_ptr = cinfo->quant_tbl_ptrs[n];
for (i = 0; i < DCTSIZE2; i++) {
tmp = JGETC(cinfo);
if (prec)
tmp = (tmp<<8) + JGETC(cinfo);
quant_ptr[i] = tmp;
}
for (i = 0; i < DCTSIZE2; i += 8) {
TRACEMS8(cinfo->emethods, 2, " %4ld %4ld %4ld %4ld %4ld %4ld %4ld %4ld",
quant_ptr[i ], quant_ptr[i+1], quant_ptr[i+2], quant_ptr[i+3],
quant_ptr[i+4], quant_ptr[i+5], quant_ptr[i+6], quant_ptr[i+7]);
}
length -= DCTSIZE2+1;
if (prec) length -= DCTSIZE2;
}
}
LOCAL void
get_dri (decompress_info_ptr cinfo)
/* Process a DRI marker */
{
if (get_2bytes(cinfo) != 4)
ERREXIT(cinfo->emethods, "Bogus length in DRI");
cinfo->restart_interval = (UINT16) get_2bytes(cinfo);
TRACEMS1(cinfo->emethods, 1,
"Define Restart Interval %ld", cinfo->restart_interval);
}
LOCAL void
get_app0 (decompress_info_ptr cinfo)
/* Process an APP0 marker */
{
#define JFIF_LEN 14
INT32 length;
UINT8 b[JFIF_LEN];
int buffp;
length = get_2bytes(cinfo) - 2;
/* See if a JFIF APP0 marker is present */
if (length >= JFIF_LEN) {
for (buffp = 0; buffp < JFIF_LEN; buffp++)
b[buffp] = (UINT8) JGETC(cinfo);
length -= JFIF_LEN;
if (b[0]==0x4A && b[1]==0x46 && b[2]==0x49 && b[3]==0x46 && b[4]==0) {
/* Found JFIF APP0 marker: check version */
/* Major version must be 1 */
if (b[5] != 1)
ERREXIT2(cinfo->emethods, "Unsupported JFIF revision number %ld.%02ld",
b[5], b[6]);
/* Minor version should be 0..2, but try to process anyway if newer */
if (b[6] > 2)
TRACEMS2(cinfo->emethods, 1, "Warning: unknown JFIF revision number %ld.%02ld",
b[5], b[6]);
/* Save info */
cinfo->density_unit = b[7];
cinfo->X_density = (b[8] << 8) + b[9];
cinfo->Y_density = (b[10] << 8) + b[11];
/* Assume colorspace is YCbCr, unless UI has overridden me */
if (cinfo->jpeg_color_space == CS_UNKNOWN)
cinfo->jpeg_color_space = CS_YCbCr;
TRACEMS3(cinfo->emethods, 1, "JFIF APP0 marker, density %ldx%ld %ld",
cinfo->X_density, cinfo->Y_density, cinfo->density_unit);
if (b[12] | b[13])
TRACEMS2(cinfo->emethods, 1, " with %ld x %ld thumbnail image",
b[12], b[13]);
if (length != ((INT32) b[12] * (INT32) b[13] * (INT32) 3))
TRACEMS1(cinfo->emethods, 1,
"Warning: thumbnail image size does not match data length %ld",
(int) length);
} else {
TRACEMS1(cinfo->emethods, 1, "Unknown APP0 marker (not JFIF), length %ld",
(int) length + JFIF_LEN);
}
} else {
TRACEMS1(cinfo->emethods, 1, "Short APP0 marker, length %ld", (int) length);
}
while (length-- > 0) /* skip any remaining data */
(void) JGETC(cinfo);
}
LOCAL void
get_sof (decompress_info_ptr cinfo, int code)
/* Process a SOFn marker */
{
INT32 length;
short ci;
int c;
jpeg_component_info * compptr;
length = get_2bytes(cinfo);
cinfo->data_precision = JGETC(cinfo);
cinfo->image_height = get_2bytes(cinfo);
cinfo->image_width = get_2bytes(cinfo);
cinfo->num_components = JGETC(cinfo);
TRACEMS4(cinfo->emethods, 1,
"Start Of Frame 0x%02x: width=%ld, height=%ld, components=%ld",
code, (int) cinfo->image_width, (int) cinfo->image_height,
cinfo->num_components);
/* We don't support files in which the image height is initially specified */
/* as 0 and is later redefined by DNL. As long as we have to check that, */
/* might as well have a general sanity check. */
if (cinfo->image_height <= 0 || cinfo->image_width <= 0
|| cinfo->num_components <= 0)
ERREXIT(cinfo->emethods, "Empty JPEG image (DNL not supported)");
#ifdef EIGHT_BIT_SAMPLES
if (cinfo->data_precision != 8)
ERREXIT(cinfo->emethods, "Unsupported JPEG data precision");
#endif
#ifdef TWELVE_BIT_SAMPLES
if (cinfo->data_precision != 12) /* this needs more thought?? */
ERREXIT(cinfo->emethods, "Unsupported JPEG data precision");
#endif
#ifdef SIXTEEN_BIT_SAMPLES
if (cinfo->data_precision != 16) /* this needs more thought?? */
ERREXIT(cinfo->emethods, "Unsupported JPEG data precision");
#endif
if (length != (cinfo->num_components * 3 + 8))
ERREXIT(cinfo->emethods, "Bogus SOF length");
cinfo->comp_info = (jpeg_component_info *) (*cinfo->emethods->alloc_small)
(cinfo->num_components * SIZEOF(jpeg_component_info));
for (ci = 0; ci < cinfo->num_components; ci++) {
compptr = &cinfo->comp_info[ci];
compptr->component_index = ci;
compptr->component_id = JGETC(cinfo);
c = JGETC(cinfo);
compptr->h_samp_factor = (c >> 4) & 15;
compptr->v_samp_factor = (c ) & 15;
compptr->quant_tbl_no = JGETC(cinfo);
TRACEMS4(cinfo->emethods, 1, " Component %ld: %ldhx%ldv q=%ld",
compptr->component_id, compptr->h_samp_factor,
compptr->v_samp_factor, compptr->quant_tbl_no);
}
}
LOCAL void
get_sos (decompress_info_ptr cinfo)
/* Process a SOS marker */
{
INT32 length;
int i, ci, n, c, cc;
jpeg_component_info * compptr;
length = get_2bytes(cinfo);
n = JGETC(cinfo); /* Number of components */
cinfo->comps_in_scan = n;
length -= 3;
if (length != (n * 2 + 3) || n < 1 || n > MAX_COMPS_IN_SCAN)
ERREXIT(cinfo->emethods, "Bogus SOS length");
TRACEMS1(cinfo->emethods, 1, "Start Of Scan: %ld components", n);
for (i = 0; i < n; i++) {
cc = JGETC(cinfo);
c = JGETC(cinfo);
length -= 2;
for (ci = 0; ci < cinfo->num_components; ci++)
if (cc == cinfo->comp_info[ci].component_id)
break;
if (ci >= cinfo->num_components)
ERREXIT(cinfo->emethods, "Invalid component number in SOS");
compptr = &cinfo->comp_info[ci];
cinfo->cur_comp_info[i] = compptr;
compptr->dc_tbl_no = (c >> 4) & 15;
compptr->ac_tbl_no = (c ) & 15;
TRACEMS3(cinfo->emethods, 1, " c%ld: [dc=%ld ac=%ld]", cc,
compptr->dc_tbl_no, compptr->ac_tbl_no);
}
while (length > 0) {
(void) JGETC(cinfo);
length--;
}
}
LOCAL void
get_soi (decompress_info_ptr cinfo)
/* Process an SOI marker */
{
int i;
TRACEMS(cinfo->emethods, 1, "Start of Image");
/* Reset all parameters that are defined to be reset by SOI */
for (i = 0; i < NUM_ARITH_TBLS; i++) {
cinfo->arith_dc_L[i] = 0;
cinfo->arith_dc_U[i] = 1;
cinfo->arith_ac_K[i] = 5;
}
cinfo->restart_interval = 0;
cinfo->density_unit = 0; /* set default JFIF APP0 values */
cinfo->X_density = 1;
cinfo->Y_density = 1;
cinfo->CCIR601_sampling = FALSE; /* Assume non-CCIR sampling */
}
LOCAL int
next_marker (decompress_info_ptr cinfo)
/* Find the next JPEG marker */
/* Note that the output might not be a valid marker code, */
/* but it will never be 0 or FF */
{
int c, nbytes;
nbytes = 0;
do {
do { /* skip any non-FF bytes */
nbytes++;
c = JGETC(cinfo);
} while (c != 0xFF);
do { /* skip any duplicate FFs */
/* we don't increment nbytes here since extra FFs are legal */
c = JGETC(cinfo);
} while (c == 0xFF);
} while (c == 0); /* repeat if it was a stuffed FF/00 */
if (nbytes != 1)
WARNMS2(cinfo->emethods,
"Corrupt JPEG data: %ld extraneous bytes before marker 0x%02x",
nbytes-1, c);
return c;
}
LOCAL JPEG_MARKER
process_tables (decompress_info_ptr cinfo)
/* Scan and process JPEG markers that can appear in any order */
/* Return when an SOI, EOI, SOFn, or SOS is found */
{
int c;
while (TRUE) {
c = next_marker(cinfo);
switch (c) {
case M_SOF0:
case M_SOF1:
case M_SOF2:
case M_SOF3:
case M_SOF5:
case M_SOF6:
case M_SOF7:
case M_JPG:
case M_SOF9:
case M_SOF10:
case M_SOF11:
case M_SOF13:
case M_SOF14:
case M_SOF15:
case M_SOI:
case M_EOI:
case M_SOS:
return ((JPEG_MARKER) c);
case M_DHT:
get_dht(cinfo);
break;
case M_DAC:
get_dac(cinfo);
break;
case M_DQT:
get_dqt(cinfo);
break;
case M_DRI:
get_dri(cinfo);
break;
case M_APP0:
get_app0(cinfo);
break;
case M_RST0: /* these are all parameterless */
case M_RST1:
case M_RST2:
case M_RST3:
case M_RST4:
case M_RST5:
case M_RST6:
case M_RST7:
case M_TEM:
TRACEMS1(cinfo->emethods, 1, "Unexpected marker 0x%02x", c);
break;
default: /* must be DNL, DHP, EXP, APPn, JPGn, COM, or RESn */
skip_variable(cinfo, c);
break;
}
}
}
/*
* Initialize and read the file header (everything through the SOF marker).
*/
METHODDEF void
read_file_header (decompress_info_ptr cinfo)
{
int c;
/* Demand an SOI marker at the start of the file --- otherwise it's
* probably not a JPEG file at all. If the user interface wants to support
* nonstandard headers in front of the SOI, it must skip over them itself
* before calling jpeg_decompress().
*/
if (JGETC(cinfo) != 0xFF || JGETC(cinfo) != M_SOI)
ERREXIT(cinfo->emethods, "Not a JPEG file");
get_soi(cinfo); /* OK, process SOI */
/* Process markers until SOF */
c = process_tables(cinfo);
switch (c) {
case M_SOF0:
case M_SOF1:
get_sof(cinfo, c);
cinfo->arith_code = FALSE;
break;
case M_SOF9:
get_sof(cinfo, c);
cinfo->arith_code = TRUE;
break;
default:
ERREXIT1(cinfo->emethods, "Unsupported SOF marker type 0x%02x", c);
break;
}
/* Figure out what colorspace we have */
/* (too bad the JPEG committee didn't provide a real way to specify this) */
switch (cinfo->num_components) {
case 1:
cinfo->jpeg_color_space = CS_GRAYSCALE;
break;
case 3:
/* if we saw a JFIF marker, leave it set to YCbCr; */
/* also leave it alone if UI has provided a value */
if (cinfo->jpeg_color_space == CS_UNKNOWN) {
short cid0 = cinfo->comp_info[0].component_id;
short cid1 = cinfo->comp_info[1].component_id;
short cid2 = cinfo->comp_info[2].component_id;
if (cid0 == 1 && cid1 == 2 && cid2 == 3)
cinfo->jpeg_color_space = CS_YCbCr; /* assume it's JFIF w/out marker */
else if (cid0 == 1 && cid1 == 4 && cid2 == 5)
cinfo->jpeg_color_space = CS_YIQ; /* prototype's YIQ matrix */
else {
TRACEMS3(cinfo->emethods, 1,
"Unrecognized component IDs %ld %ld %ld, assuming YCbCr",
cid0, cid1, cid2);
cinfo->jpeg_color_space = CS_YCbCr;
}
}
break;
case 4:
cinfo->jpeg_color_space = CS_CMYK;
break;
default:
cinfo->jpeg_color_space = CS_UNKNOWN;
break;
}
}
/*
* Read the start of a scan (everything through the SOS marker).
* Return TRUE if find SOS, FALSE if find EOI.
*/
METHODDEF boolean
read_scan_header (decompress_info_ptr cinfo)
{
int c;
/* Process markers until SOS or EOI */
c = process_tables(cinfo);
switch (c) {
case M_SOS:
get_sos(cinfo);
return TRUE;
case M_EOI:
TRACEMS(cinfo->emethods, 1, "End Of Image");
return FALSE;
default:
ERREXIT1(cinfo->emethods, "Unexpected marker 0x%02x", c);
break;
}
return FALSE; /* keeps lint happy */
}
/*
* The entropy decoder calls this routine if it finds a marker other than
* the restart marker it was expecting. (This code is *not* used unless
* a nonzero restart interval has been declared.) The passed parameter is
* the marker code actually found (might be anything, except 0 or FF).
* The desired restart marker is that indicated by cinfo->next_restart_num.
* This routine is supposed to apply whatever error recovery strategy seems
* appropriate in order to position the input stream to the next data segment.
* For some file formats (eg, TIFF) extra information such as tile boundary
* pointers may be available to help in this decision.
*
* This implementation is substantially constrained by wanting to treat the
* input as a data stream; this means we can't back up. (For instance, we
* generally can't fseek() if the input is a Unix pipe.) Therefore, we have
* only the following actions to work with:
* 1. Do nothing, let the entropy decoder resume at next byte of file.
* 2. Read forward until we find another marker, discarding intervening
* data. (In theory we could look ahead within the current bufferload,
* without having to discard data if we don't find the desired marker.
* This idea is not implemented here, in part because it makes behavior
* dependent on buffer size and chance buffer-boundary positions.)
* 3. Push back the passed marker (with JUNGETC). This will cause the
* entropy decoder to process an empty data segment, inserting dummy
* zeroes, and then re-read the marker we pushed back.
* #2 is appropriate if we think the desired marker lies ahead, while #3 is
* appropriate if the found marker is a future restart marker (indicating
* that we have missed the desired restart marker, probably because it got
* corrupted).
* We apply #2 or #3 if the found marker is a restart marker no more than
* two counts behind or ahead of the expected one. We also apply #2 if the
* found marker is not a legal JPEG marker code (it's certainly bogus data).
* If the found marker is a restart marker more than 2 counts away, we do #1
* (too much risk that the marker is erroneous; with luck we will be able to
* resync at some future point).
* For any valid non-restart JPEG marker, we apply #3. This keeps us from
* overrunning the end of a scan. An implementation limited to single-scan
* files might find it better to apply #2 for markers other than EOI, since
* any other marker would have to be bogus data in that case.
*/
METHODDEF void
resync_to_restart (decompress_info_ptr cinfo, int marker)
{
int desired = cinfo->next_restart_num;
int action = 1;
/* Always put up a warning. */
WARNMS2(cinfo->emethods,
"Corrupt JPEG data: found 0x%02x marker instead of RST%ld",
marker, desired);
/* Outer loop handles repeated decision after scanning forward. */
for (;;) {
if (marker < M_SOF0)
action = 2; /* invalid marker */
else if (marker < M_RST0 || marker > M_RST7)
action = 3; /* valid non-restart marker */
else {
if (marker == (M_RST0 + ((desired+1) & 7)) ||
marker == (M_RST0 + ((desired+2) & 7)))
action = 3; /* one of the next two expected restarts */
else if (marker == (M_RST0 + ((desired-1) & 7)) ||
marker == (M_RST0 + ((desired-2) & 7)))
action = 2; /* a prior restart, so advance */
else
action = 1; /* desired restart or too far away */
}
TRACEMS2(cinfo->emethods, 4,
"At marker 0x%02x, recovery action %ld", marker, action);
switch (action) {
case 1:
/* Let entropy decoder resume processing. */
return;
case 2:
/* Scan to the next marker, and repeat the decision loop. */
marker = next_marker(cinfo);
break;
case 3:
/* Put back this marker & return. */
/* Entropy decoder will be forced to process an empty segment. */
JUNGETC(marker, cinfo);
JUNGETC(0xFF, cinfo);
return;
}
}
}
/*
* Finish up after a compressed scan (series of read_jpeg_data calls);
* prepare for another read_scan_header call.
*/
METHODDEF void
read_scan_trailer (decompress_info_ptr cinfo)
{
/* no work needed */
}
/*
* Finish up at the end of the file.
*/
METHODDEF void
read_file_trailer (decompress_info_ptr cinfo)
{
/* no work needed */
}
/*
* The method selection routine for standard JPEG header reading.
* Note that this must be called by the user interface before calling
* jpeg_decompress. When a non-JFIF file is to be decompressed (TIFF,
* perhaps), the user interface must discover the file type and call
* the appropriate method selection routine.
*/
GLOBAL void
jselrjfif (decompress_info_ptr cinfo)
{
cinfo->methods->read_file_header = read_file_header;
cinfo->methods->read_scan_header = read_scan_header;
/* For JFIF/raw-JPEG format, the user interface supplies read_jpeg_data. */
#if 0
cinfo->methods->read_jpeg_data = read_jpeg_data;
#endif
cinfo->methods->resync_to_restart = resync_to_restart;
cinfo->methods->read_scan_trailer = read_scan_trailer;
cinfo->methods->read_file_trailer = read_file_trailer;
}
#endif /* JFIF_SUPPORTED */